Peco PL-18 Stud and Tag Washers for Turnout Motor operation
STUD AND TAG WASHERS FOR TURNOUT MOTOR OPERATION
A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.
Recommended to be used with:
- PL-17 Probe for Operating Turnout Motors
- PL-10 Turnout Motors