slot.it

SCP2 complete trigger setSpare trigger set for SCP-2 controllers - 1 or 2 finger lever - rubber injected finger touch - high precision ball bearing...

The HRS chassis is a fully configurable, universal plastic chassis for slot cars.It comprises four main parts: main chassis, front chassis, motor m...

Slot.it HRS1 Chassis Main Frame Flexible

For SICA01 cars

Brass terminals ?1,5 L4mm (10x)

Front and Rear SCX RX Type Motor Adaptor to suit Mabuchi Style Motors

Universal lighting kit for Analog, O2 and SSD cars

 Brass Eyelets (10 pack) for front wheel axles

Slot.it SP18 Copper Braid (Tinned) - 1 metre lengthSuper soft tinned copper braid for non-magnet racing. Enable the guide to sit deep in the slot w...

One Metre of extra soft copper braid.  Allows the guide to sit deep in the slot without "bounce"

High flexibility replacement silicon cable in 1 metre lengthsRed copper cable with thermal resisting silicone sleeve, 23 AWG (0.25mm2)With reduced ...

Tungsten ballast, motor mount shape, 2.5g

Tungsten ballast, cylinder 6.3*1mm, 3.5g (6x0.58g)

Tungsten ballast, putty, 10gDescription: putty ballast, in polymer+tungsten, shapes easily, 10g each.

These brushes are cut from highest quality copper braid, only 0.2 mm thick. One end is tinned and drilled (1.5 mm hole). These braids are very simi...

Transparent plastic spare parts containers - 4pcs

Pre-cut brass tabs for LMP pickups (6x)

This grease, free of resins and acids, has a special PTFE-based composition with extra fine particles. It seals most micro pores thus creating an e...

Low friction, PTFE-based oil for all slot cars needs. For metal and plastic. Resin and acid free. Optimal creeping, wetting, and wear resistance pr...

This product is a special oil for slot cars motors, free of resin and acids.Its PTFE-based special active formula adheres to almost any materials,e...

Chip for Carrera D132 digital system ? In-car controller? Small (25x15 mm) in-car chip for Carrera Digital D132.? Comes with standard Slot.it conne...