Tamiya 58741 1:10 FIGHTER NXGEN
$5 COURIER DELIVERY within NZ for all orders over $99 NZD!
The DT series of chassis and its Fighter Buggy models enjoy great popularity around the world, and have evolved through iterations such as the Fighter Buggy RX on the DT-01 chassis, the Super Fighter G on the DT-02, the Neo Fighter Buggy on the DT-03, and now the Fighter NXGEN on the new DT-04 chassis. Its body is inspired by full size single-seater buggies, and has separate body panels screw-fixed to its frame. A driver figure is also included.
DT-04 Chassis: Lively RWD Performance
This is a rear-wheel drive buggy chassis which offers ease of assembly and lively performance. It has an inline battery pack position, and a rear-mounted motor to give the rear wheels plenty of traction. The sealed gearbox has a built-in gear differential for smooth cornering and helps keep out dust and dirt. Two wheelbases can be selected: 265mm for emphasis on handling or 280mm for emphasis on stability. 4-wheel independent double wishbone suspension with long arms employs CVA oil dampers. Front skid angle is 22.5 degrees to ensure both controllability and powerful performance. The 3-piece steering tie-rod gives true steering. Here, the chassis features ribbed tires on the front, and grippy square spike tires on the rear.
Specifications
●Length: 395mm (with 265mm wheelbase), width: 245mm, height: 125mm ●Wheelbase: 265mm/280mm ●Tread (front/rear): 217mm/204mm ●Tire width/diameter: 27/80mm (front), 41/86mm (rear) ●Monocoque frame ●Rear-wheel drive ●3-bevel differential ●3-piece steering tie-rod ●Front & rear double wishbone suspension with CVA oil dampers ●Gear Ratio = 9.28:1 ●Type 540 Motor ●ESC included for export.
Separately Required Items
●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter
Servo:
Dsservo DS3218-180 20kg Metal Gear Servo
Batteries: 7.2v - 7.4v (eg: NiMh)
Note: some batteries may require padding to hold in place.
On the supplied ESCs, ensure the correct jumper position based on the battery being used.
- Gens Ace 7.2V 3000mah NiMH battery pack with Tamiya Plug
- Gens Ace 7.2V 5000mah NiMh Battery Pack with Tamiya Plug
Charger:
Please ensure that you read the manual for your charger before charging any batteries.
- GT-Power chargers with the correct adaptors and cell chemistry
- EV-Peak (NiMh/NiCd) - Recommended for NiMh Batteries
- HPI USB 2-6 cell 500ma NiMh delta peak charger (not compatible with batteries over 2500mah)
Transmitter & Receiver: