Tamiya 58710 Hotshot II Blockhead Motors (Excludes ESC)
$5 COURIER DELIVERY within NZ for all orders over $99 NZD!
Customized Hotshot II
The Hotshot II debuted in 1987, a follow up to the Hotshot, our wildly popular first-ever shaft driven 4WD buggy. Now, the Hotshot II makes a re-appearance with various tweaks added by the famous Japanese designer Mr. Jun Watanabe. It features an overhauled color scheme of brilliant blue (body and wing are pre-painted in this color, and pre-cut), with a prominent white stripe. The driver figure position has also been reevaluated, while the upper deck and roll cage are new components, bringing the driver up to a more realistic location. Guards and car number plates were also designed by Watanabe, while the motor has a dedicated sticker.
Shaft Driven 4WD Chassis
Based upon the original Hotshot II design, this shaft driven 4WD chassis has sealed gearboxes and differentials front and rear and gives an intuitive drive. The front of the four-wheel double wishbone suspension employs a monoshock setup, with two dampers at the rear (all are CVA oil dampers molded in yellow), while metal plated parts such as uprights and wheels give the model a realistic look. The latter are shod with hybrid oval block/pin spike low-profile tires.
Specifications
★Length: 390 mm, width: 235 mm, height: 150 mm ★Weight: 1,285 g ★Tread: 205 mm (front), 200 mm (rear) ★Tire width/diameter: 31/88 mm (front), 38/88 mm (rear) ★ABS monocoque ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel double wishbone suspension ★Gear ratio = 8.70:1 ★Type 540 motor (with dedicated sticker) ★Electronic speed controller (ESC) is sold separately.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
ESC:
Servo:
Dsservo DS3218-180 20kg Metal Gear Servo
Batteries: 7.2v - 7.4v (eg: NiMh)
Note: some batteries may require padding to hold in place.
On the supplied ESCs, ensure the correct jumper position based on the battery being used.
- Gens Ace 7.2V 3000mah NiMH battery pack with Tamiya Plug
- Gens Ace 7.2V 5000mah NiMh Battery Pack with Tamiya Plug
Charger:
Please ensure that you read the manual for your charger before charging any batteries.
- GT-Power chargers with the correct adaptors and cell chemistry
- EV-Peak (NiMh/NiCd) - Recommended for NiMh Batteries
- HPI USB 2-6 cell 500ma NiMh delta peak charger (not compatible with batteries over 2500mah)
Transmitter & Receiver: