Slot Car Racing - New

Slot.it PS12 Sidewinder Brass pinions 12 teeth Ø 6.5mm (2x)

- This pinion can be used on models from all brands using a motor shaft of 2 mm diameter, in combination with anglewinder gears Ø15 mm Slot.it. - o...

10 tooth pinion 6mm diameter for use with Flat 6 motors in anglewinder configuration

Brass pinions 11 teeth Ø5.5mm (2x)

Wheel inserts, RAYS type 6 spoke for Ø15.8/16.5mm wheels- Compatible with Ø15,8mm and Ø16.5mm - Pack includes 4 wheels inserts

Suit  Maserati GT3/GT4, and any cars using Slot.it 17.3mm hubs

Wheel Inserts for Alfa 155 DTM  CA40 and CA45    OZ type  Suit any 15.8 and 16.5mm hubs- Compatible with Ø15,8mm wheels designed for RWD as well as...

- Compatible with Ø15,8mm wheels designed for RWD as well as 4WD systems. - Pack includes 4 STD inserts and 2 front for 4WD wheels.

New hexagonal tip, M2, adjustable torque screwdriver for Slot.it M2 grub. New tip material made of special 'tool grade' steel.

Spare parts for the stock front wheels used on the Audi R18 e-tron with 4WD Slot.it system. These wheels are designed for the CH96 one-way bearing....

Wheel Inserts for Alfa 155 DTM Speedline typeSuit any 15.8 and 16.5mm hubs

Adjustable torque wrench to set consistent tightness of Torx T3 grub screws.The inner spring may be easily adjusted. The new material makes it very...

Torx type Grub screw for use with Torx T3 PA57c dyno wrench

- Compatible with 15,8mm diameter wheels (rear) and 14.3mm diameter wheels (front). - Pack includes 4 inserts and 2 bolts, not painted.

4x inserts for small hubs - eg PA17, W1580215 and 1580225 and 2x to fit mid-sized PA43 / W1650215 hub as fitted to the newer release Group C cars

Set of spacers for hubs and bushings - 0.60mm thick● Designed to set up axles, especially on anglewinder and sidewinder cars● The new, thicker, spa...

Set of spacers (10x)  for hubs - 1mm thick

for PA17/24 wheels (15.8 & 16.5mm)

Hexagonal screw M2 L6 (10x)

- Stall torque: 170 g*cm- Maximum speed: 23000 rpm- Maximum power: 9.8 W @ 12 VThis is the identical motor as used as standard in Group C and the S...

Description: Flat-6 RS, 25,000 rpm, 240g*cm torque, 15 watt differing case openings.The new flat six motors represent a new type of motor for slot ...