Products

Low friction, PTFE-based oil for all slot cars needs. For metal and plastic. Resin and acid free. Optimal creeping, wetting, and wear resistance pr...

This product is a special oil for slot cars motors, free of resin and acids.Its PTFE-based special active formula adheres to almost any materials,e...

Chip for Carrera D132 digital system – In-car controller● Small (25x15 mm) in-car chip for Carrera Digital D132.● Comes with standard Slot.it conne...

The Slot.it pinion press/extractor tool The SLOT.IT extractor/press is the perfect companion for the slot car enthusiast. It presses and removes pi...

Product code: TL02Description: Extraction plate and counter bushing for extractor press  TL01 / SP21 / SP20Replacement for: SP27The steel extractio...

The Mini Puller Slot.it 'TL05' similar to SP31b, allows to remove and adjust* the pinion position without waste of time and hard work to unmount tr...

The Slot.it pinion press/extractor tool The SLOT.IT extractor/press is the perfect companion for the slot car enthusiast. It presses and removes pi...

Steel plug set (Ø1.9mm + Ø1.4mm) for extractor SP21 / TL01 / TL05;

Aluminum Ø14.3x8x1.5mm wheels, M2 grub, silver (2x), 1.2g - ex PA33-Als- The pack includes:- 2 grub screws L3- 2 aluminum wheels 14.3 x 8 x 1.5mm

Slot.It W15808205P Plastic ø15.8x8.2x0.5mm wheels, 0.7g (4x)

Replaces: PA24-Als (2 'OZ Type' inserts removed)Same as original small wheel PA24-als,  has narrower 1.5mm inner hub than the w15808225 version for...

Plastic ø15.8x8.2x1.5mm wheels, 0.7g (4x) - ex WH1210-Pl

Aluminum Ø15.8x8.2x2.5mm wheels, M2 grub, (2x) - ex WH1050-Al

Plastic Ø15.8x8.2x2.5mm wheels, grey (4x), 0.6g - ex PA17-PlReplaces: PA17-Pl (2 'OZ Type' inserts removed)- The pack includes: - 4 plastic wheels ...

Aluminum Ø15.8x10x1.5mm wheels, M2 grub, double shoulder, 1.3g (2x) - ex PA49-Alf

Aluminum Ø15.8x10x1.5mm wheels, M2 grub, double should holed channel, 1.2g (2x) - ex PA49-Alh

Mg Ø15 x 10 short hub hollow wheels M2 grub screws silver 0.9 g (2x)Magnesium hollow wheels to achieve the maximum lightness - External diameter: 1...

Standard wheel for Group C cars at rear. Also standard on Sideways Group 5 cars.Previously known as PA43als. Has the short 1.5mm inner bossA slight...

Magnesium ø16.5x8.2x1.5mm hollow wheels, M2 grub, 0.75g (2x) - ex WH1185-Mg;ex WH1185-Mg- Magnesium hollow wheels to achieve the maximum lightness-...

Slot.It W16509715AH Aluminum Ø16.5x9.75x1.5mm wheels, M2 grub, double shoulder holed channel, (2x)

17.3mm x 8.2mm wheels with short 1.5mm inner hub for GT and LMP cars- Wheel with 17.3 x 8.2 mm rim width and short hub (1.5 mm). - The short hub is...

Aluminum ø17.3x8.2x2.5mm wheels, M2 grub, 1.6g (2x) - ex WH1048-Al

17.3mm x 9.75mm wheels with short 1.5mm inner boss. Previously known as PA62-als Suits GT and LMP cars. This is the wider hub, generally called a "...