Ratio

RATIOPOINT CONTROL UNITIncludes a lever, cord, screw eyes and return spring - everything you need to operate one turnout.

RATIO OO/HOHANDRAIL STANCHIONS, SINGLE RAILPack contains 20 injection moulded supports and 400mm length of brass wire. (assembly required)Always di...

RATIO OO/HOHAND RAIL STANCHIONS, DOUBLE RAILPack contains 20 injection moulded supports and approx 2 x 400mm length of nickel silver railing. (asse...

RATIO NGWR STATION TRAIN SHEDFootprint: 153mm x 82mmThis superb kit is modelled on the overall roof at Ashburton, Devon. Designed for use with Stat...

RATIO NAPEX PLATFORM CANOPYFootprint: 200mm x 43mmApex canopy with valancing, stanchions and girders. The glazed sections can be placed at will. Al...

RATIO NPLATFORMSKit contains parts to make a 240mm long and 40mm wide platform; easily extended by using further kits. Use Ratio Platform Ramps kit...

RATIO NPLATFORM RAMPSFootprint: 120mm x 40mm each.Kit for 2 Platform Ramps to match Ratio Straight Platform Sections kit (Ref 209). Supplied with s...

RATIO NTELEGRAPH POLES10 Telegraph poles; Height approx 50mm these also carried railway bell codes and phone connections between signal boxes and s...

RATIO NWATER CRANE AND FIRE DEVILStations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without det...

RATIO NSTATION/STREET LAMPSPack of 4These simple kit lamps can represent oil, gas or electric lamps.Supplied with some pre-coloured parts, painting...

RATIO NYARD CRANEBase Diameter: 25mmThis basic crane is an essential for all station yards, often found inside goods sheds or on loading banks. Use...

RATIO NLINESIDE FENCING, WHITELength: 840mmA common style of fencing found in many locations.. Glue is required to complete this model.

RATIO NSIGNAL LADDERINGPack contains 3 x 63mm lengths of etched brass laddering and includes safety cages and fixings.

RATIO NCONCRETE FENCING AND GATESThis pack contains 356mm of fencing and includes 4 gates; the SR's modular design makes it easy to form ramp secti...

RATIO NWEIGHBRIDGE HUTFootprint: 30mm x 15mm.Many goods yards had weigh bridges so that the 'carriage price' of a load to be carried by rail could ...

RATIO NCOAL DEPOTFootprint 66mm x 23mmIn the days when everything came by rail, even the smallest goods yard would provide a facility for the local...

RATIO NROUND WATER TOWERTank diameter:22mm.This common type of station water tower can be used either platform or ground mounted and is supplied wi...

RATIO NCARRIAGE SHEDFootprint 178mm x 60mm.These were a common feature in sidings where repairs, cleaning and maintenance were effected. This shed ...

RATIO NCOAL/BUILDERS MERCHANTFootprint 85mm x 60mmMany merchants had private sidings where they could be supplied directly by rail. This kit includ...

RATIO LINESIDE KITS NLOADING GAUGEAfter loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridg...

RATIO NLEVEL CROSSING WITH BARRIERSThis modern style of crossing features 2 half barriers on each side of the track, protected by (dummy) warning l...

RATIO NCONCRETE HUTS (2)Kit includes parts for 2 huts: Larger Hut 23mm x 17mm, Smaller Hut 13mm SquareThe Southern Railway produced pre-cast concre...

RATIO NRETAINING WALLLength 348mm, Height 35mmOften seen supporting railway cuttings and embankments in urban areas where there is insufficient spa...

RATIO NSTEEL TRUSS BRIDGE WITH STONE PIERSSize:  Span 144mm.  Trestle: 61mm x 12mm, 125mm HeightThis kit gives you the opportunity to make an inter...

RATIO NSTEEL TRUSS SPAN WITH STEEL TRESTLESize: Span 144mm. Trestle: 61mm x 12mm, 125mm HeightThis kit is designed to extend the Steel Truss Bridge...

RATIO NSTEEL TRESTLES (2)Footprint: 61mm x 12mm, 125mm HeightThe 2 Trestles as supplied in kit 241 are available separately, ideal for use with Pec...

RATIO NGWR STRAIGHT STATION FENCINGThis pack contains Approximately 476mm of fencing.Supplied with pre-coloured parts although painting and/or weat...

RATIO NCOALING TOWERFootprint: 116mm x 92mm, Height 181mmThese towers are an impressive sight and were an essential feature on mainline railways. T...

RATIOREMOTE CONTROL FOR SIGNALSIncludes a lever, cord and screw eyes - everything you need to operate one signal.

RATIO NTHREE ARCH VIADUCTFootprint: 220mm x 63mm, 130mm High.Can be extended by adding additional kits and the 254 Piers, or with the 252 Extra Arc...

RATIO NEXTRA ARCH AND PIERExtension pack for the 251 Viaduct kit. 73mm Long, 63mm Wide and 130mm High. Supplied with pre-coloured parts although pa...

RATIO NRIVER/CANAL BRIDGEHeight 68mm.The Wills scenic series provides a range of simple to make kits that help to change your layout into a model r...

RATIO NSTONE PIERS (2)Height 88mm, width 63mm eachAdditional piers for the 251 Viaduct kit, can also be used as supports for the NB-38 and 39 Girde...

RATIO NLARGE WATER TOWERFootprint 72mm x 30mmThis 20,000 gallon design is equally at home replenishing water troughs (Ratio Water Troughs kit Ref 2...

RATIO NRELAY BOXESKit contains parts to make 12 Relay Boxes. Use with Concrete Trunking (Ref 258); Supplied with pre-coloured parts although painti...