{"title":"Digital Decoders","description":"","products":[{"product_id":"digitrax-dz123-mobile-dcc-decoder-wired-1-0-amp-2-function-no-back-emf","title":"Digitrax DZ123 Mobile DCC Decoder - Wired 1.0 Amp 2-Function","description":"\u003cp\u003eFeatures:\u003cbr\u003eDigitrax LocoMotion® System\u003cbr\u003eYour locomotives look like the real thing. The Digitrax LocoMotion® System makes them run like the real thing, too!\u003c\/p\u003e\u003cp\u003eTorque Compensation for smooth as silk silent operation.\u003c\/p\u003e\u003cp\u003e128 Speed Step operation (14 or 28 steps can also be used).\u003c\/p\u003e\u003cp\u003eMomentum with acceleration and deceleration.\u003c\/p\u003e\u003cp\u003eNormal Direction of Travel is user selectable.\u003c\/p\u003e\u003cp\u003eSwitching Speed feature for easier and faster access to yard speeds.\u003c\/p\u003e\u003cp\u003e3 Step Speed Tables set start, mid and max voltage for custom control.\u003c\/p\u003e\u003cp\u003e28 Step Speed Tables with 256 level resolution for precise control.\u003c\/p\u003e\u003cp\u003eSuperSonic™ motor drive for silent operation.\u003c\/p\u003e\u003cp\u003eFX3 Function outputs for prototypical lighting effects and on\/off control.\u003c\/p\u003e\u003cp\u003eConstant Brightness Lighting with directional or independent control.\u003c\/p\u003e\u003cp\u003eRealistic Effects like Ditch lights, Mars lights, strobes, and many more.\u003c\/p\u003e\u003cp\u003eFX3 \u0026amp; Standard Function Qualifiers operate functions based on direction,\u003c\/p\u003e\u003cp\u003eF0 on or off, direction and F0, and whether loco is moving.\u003c\/p\u003e\u003cp\u003eFunction Remapping for custom function setup.\u003c\/p\u003e\u003cp\u003eMaster Light Switch turns off all lights \u0026amp; functions with one keystroke.\u003c\/p\u003e\u003cp\u003eDecoder Lock equipped.\u003c\/p\u003e\u003cp\u003eTransponder equipped ready for transponding on your layout.\u003c\/p\u003e\u003cp\u003eAll Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.\u003c\/p\u003e\u003cp\u003eDecoder Reset CV with or without speed table reset.\u003c\/p\u003e\u003cp\u003eMotor Isolation Protection prevents damage to your decoder.\u003c\/p\u003e\u003cp\u003eBasic, Advanced \u0026amp; UniVersal Consisting\u003c\/p\u003e\u003cp\u003e2 Digit and 4 Digit Addressing.\u003c\/p\u003e\u003cp\u003eWorks with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage.  UP6Z can be used to drop track voltage.\u003c\/p\u003e\u003cp\u003eDCC Compatible\u003c\/p\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":32369823219800,"sku":"DIG-DZ123","price":72.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/12387_PriceBreak_12388.jpg?v=1775015935"},{"product_id":"hornby-x9659-decoder-with-4-pin-wired-plug","title":"Hornby X9659 DCC Decoder with 4-Pin wired plug","description":"\u003cp\u003e4 pin decoder for DCC fitted 0-6-0 locomotives and the new Sentinel. A unique decoder for smaller locos with restricted space.\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":32370760482904,"sku":"HOR X9659","price":25.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/14270_PriceBreak_14271.jpg?v=1783393235"},{"product_id":"digitrax-dz126t-2-function-wired-decoder-tiny-series-6-14-x-7-13-x-3-25mm","title":"Digitrax DZ126 1 Amp Z \/ N \/ HO Scale Wired Mobile Decoder","description":"\u003cp\u003eFits Many Z, N and HO Scale Locomotives\u003cbr\u003e\u003cbr\u003eSize: .455? x .369? x .126?\u003cbr\u003e11.56mm x 9.37mm x 3.2mm\u003cbr\u003eZ\/N\/HO Scale\u003cbr\u003e1.0 Amp\/1.5 Amps Peak\u003cbr\u003e2 FX3 Functions, 0.5 Amp\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX\u003csup\u003e3\u003c\/sup\u003e\u003c\/strong\u003e Function outputs for prototypical lighting effects and on\/off control:\u003cbr\u003e\u003cstrong\u003eConstant Brightness Lighting\u003c\/strong\u003e with directional or independent control.\u003cbr\u003e\u003cstrong\u003eOptimized selectable LED or incandescent lamp operation\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRealistic Effects\u003c\/strong\u003e like Ditch lights, Mars lights, strobes, and many more\u003cbr\u003e\u003cstrong\u003eConfigurable Pulse Function\u003c\/strong\u003e available on all function outputs.\u003cbr\u003e\u003cstrong\u003eFX\u003csup\u003e3\u003c\/sup\u003e \u0026amp; Standard Function Qualifiers\u003c\/strong\u003e operate functions based on direction,\u003cbr\u003eF0 on or off, direction and F0, and whether loco is moving.\u003cbr\u003e\u003cstrong\u003eFunction Mapping\u003c\/strong\u003e for custom function setup.\u003cbr\u003e\u003cstrong\u003eMaster Light Switch\u003c\/strong\u003e turns off all lights \u0026amp; functions with one keystroke.\u003cbr\u003e\u003cstrong\u003eAdvanced Consist Function Controls.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigitrax LocoMotion\u003csup\u003e?\u003c\/sup\u003e System\u003c\/strong\u003e-Your locomotives look like the real thing.\u003cbr\u003eThe Digitrax LocoMotion System makes them run like the real thing, too!\u003cbr\u003e\u003cstrong\u003eScaleable Speed Stabilization (Back EMF)\u003c\/strong\u003e with simple setup \u0026amp; 256 level resolution.\u003cbr\u003e\u003cstrong\u003eTorque Compensation.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e128 Speed Step\u003c\/strong\u003e operation (14 or 28 steps can also be used).\u003cbr\u003e\u003cstrong\u003eMomentum\u003c\/strong\u003e with acceleration and deceleration.\u003cbr\u003e\u003cstrong\u003eNormal Direction of Travel\u003c\/strong\u003e is user selectable.\u003cbr\u003e\u003cstrong\u003eSwitching Speed\u003c\/strong\u003e feature for easier and faster access to yard speeds.\u003cbr\u003e\u003cstrong\u003e3 Step Speed Tables\u003c\/strong\u003e set start, mid and max voltage for custom control.\u003cbr\u003e\u003cstrong\u003e28 Step Speed Tables\u003c\/strong\u003e with 256 level resolution for precise control.\u003c\/li\u003e\n\u003cli\u003eProgram CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.\u003c\/li\u003e\n\u003cli\u003e2 Digit and 4 Digit Addressing.\u003c\/li\u003e\n\u003cli\u003eBasic, Advanced \u0026amp; UniVersal Consisting.\u003c\/li\u003e\n\u003cli\u003eSuperSonic motor drive for silent operation.\u003c\/li\u003e\n\u003cli\u003eDirect mode programming.\u003c\/li\u003e\n\u003cli\u003eDecoder Reset CV with or without speed table reset.\u003c\/li\u003e\n\u003cli\u003eTransponder Equipped ready for transponding on your Layout.\u003c\/li\u003e\n\u003cli\u003eMotor Isolation Protection helps prevent damage to your decoder.\u003c\/li\u003e\n\u003cli\u003eAutomatic Analog Mode Conversion when running on DC layout.\u003c\/li\u003e\n\u003cli\u003eDecoder Lock for individual programming of multiple decoders in one loco.\u003c\/li\u003e\n\u003cli\u003eDigitrax ?No Worries? Warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":32371381567576,"sku":"DIG-DZ126","price":79.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/DZ126D_jpg_2000x2000_q85_d56d333a-eb7f-4590-89c3-8d8ad67acd56.jpg?v=1723777833"},{"product_id":"atlas-522299-n-mp15dc-dcc-decoder","title":"Atlas 522299 N MP15 DCC Decoder","description":"\u003cp\u003eAtlas 522299 N MP15 DCC Decoder\u003c\/p\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":32371662717016,"sku":"ATL-522299","price":94.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/10356_Image1_600x432_resized.jpg?v=1783628063"},{"product_id":"hornby-r7150-standard-6-pin-decoder-2-function","title":"Hornby R7150 Standard 6 pin DCC Decoder - 2 Function","description":"\u003cp\u003eStandard 6 pin Decoder - 2 Function\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":32371670909016,"sku":"HOR R7150","price":92.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/14043_PriceBreak_14044.jpg?v=1771032693"},{"product_id":"digitrax-dhwhp-harness-9-pin-to-dcc-medium-plug","title":"Digitrax DHWHP Harness : 9-Pin to DCC Medium Plug","description":"\u003cp\u003eDigitrax 9-pin to DCC Medium Plug : long harness (3”)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"background-color: #ffffff;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"background-color: #ffffff;\"\u003eEasy to connect decoder with DCC Plug \u0026amp; Digitrax wire harness \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"background-color: #ffffff;\"\u003eAllows you to share decoders among several locomotives \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"background-color: #ffffff;\"\u003eInteroperable with other DCC systems \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"background-color: #ffffff;\"\u003e4 function outputs rated at 500mA \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":32371724320856,"sku":"DIG-DHWHP","price":24.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/dhwhp_695x695_resized.jpg?v=1749465503"},{"product_id":"digitrax-30awg-10-decoder-wire-9-conductor","title":"Digitrax DCDRWIRE Decoder Wire - 9 Conductor 30AWG 10-Feet","description":"\u003cp\u003eThe same fine wire Digitrax uses on its N and Z Scale decoders. Great for installing extra lamps and other accessories in your locomotives.\u003c\/p\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":32371996426328,"sku":"DIG-DCDRWIRE","price":51.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/decoder_wire_245-dcdrwire.gif?v=1775015942"},{"product_id":"bachmann-36-556ra-e-z-command-90-degree-6-pin-dcc-decoder","title":"E-Z Command 36-556RA 6 Pin 90° DCC Loco-Decoder","description":"\u003cp\u003eA 6 Pin DCC Decoder designed specifically for use in the Graham Farish N scale Class 3F ‘Jinty’ (item No. 372-21x) and Class 64XX ‘Pannier Tank’ (item No. 371-98x) locomotives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDual-mode DCC\/DC decoder with Back EMF function\u003cbr\u003e1.0A continuous load\u003cbr\u003e2 powered function outputs\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNMRA DCC with 14, 28 and 128 speed steps\u003cbr\u003eShort and Long addresses\u003cbr\u003eAdvanced consist addressing\u003cbr\u003eDCC and DC operation\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1.0A continuous load\u003cbr\u003eBack EMF speed regulation\u003cbr\u003eSilent 15.6Khz pulse width modulation of motor voltage\u003cbr\u003eAdjustable acceleration and braking\u003cbr\u003e15 pre-set speed curves\u003cbr\u003e28-point user programmable speed curve\u003cbr\u003eSupports brake on DC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e2 powered function outputs\u003cbr\u003e100mA load per output\u003cbr\u003eNMRA function mapping to match outputs with user selectable function key\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e14.5mm x 9.5mm x 3.5mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Soundtraxx. For full technical specifications and instructions, please refer to the Soundtraxx user guide for MC1 decoders at \u003c\/em\u003e\u003cstrong\u003e\u003cem\u003ewww.soundtraxx.com\/manuals\/mobile-decoders\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":32372174946392,"sku":"MRA-36-556RA","price":46.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/products\/36-556RA_d5934357-0f67-454a-9c62-b55b913e0996.jpg?v=1706039145"},{"product_id":"bachmann-36-562-6-pin-decoder-socket-with-wiring-harness-x3","title":"E-Z Command 36-562 6 Pin Decoder Socket with wiring harness (3)","description":"\u003cp\u003e6 Pin Decoder Socket with wiring harness (3)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":32372180320344,"sku":"MRA-36-562","price":38.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/36-562_58c0032b-750f-4a99-baee-46ad3c2625de.jpg?v=1724301526"},{"product_id":"bachmann-36-563-6pin-decoder-socket","title":"E-Z Command 36-563 6 Pin Decoder Socket with 8 Pin Plug (3)","description":"\u003cp\u003e6 Pin Decoder Socket with 8 Pin Plug (3)\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":32372180516952,"sku":"MRA-36-563","price":45.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/36-563.jpg?v=1716331267"},{"product_id":"branchline-36-566-0-9amp-4-function-8-pin-dcc-decoder-featuring-railcomplus","title":"E-Z Command 36-566A 8 Pin DCC Loco-Decoder (with Brake Button function)","description":"\u003cp\u003eA 8 Pin (NEM652) DCC Decoder suitable for models fitted with a 8 Pin DCC decoder socket.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder replaces item No. 36-566 and can be used in any model for which item No. 36-566 is recommended\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDual-mode DCC\/DC decoder with Back EMF function\u003c\/p\u003e\u003cp\u003e4 powered function outputs\u003c\/p\u003e\u003cp\u003e0.9A continuous load\u003c\/p\u003e\u003cp\u003eRailComPlus® for automatic registration when used with selected DCC systems\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNMRA\/DCC with 14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003eDCC and DC operation (DC operation is de-selectable)\u003c\/p\u003e\u003cp\u003eAutomatic recognition of operational mode and DCC speed step selection\u003c\/p\u003e\u003cp\u003eSupports Lenz® LG 100 braking sections\u003c\/p\u003e\u003cp\u003eSupports ABC braking sections\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003e0.9A continuous load\u003c\/p\u003e\u003cp\u003eMotor regulation with pulse width frequency from 10kHz to 50kHz\u003c\/p\u003e\u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e4 powered-function outputs with overload protection\u003c\/p\u003e\u003cp\u003e250mA load per output\u003c\/p\u003e\u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e\u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e25.5mm x 15.5mm x 4.5mm (+ wiring harness)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom® Feedback system\u003c\/p\u003e\u003cp\u003eRailComPlus® automatic Registration\u003c\/p\u003e\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by ESU. For full technical specifications and instructions, please refer to the ESU user guide for Lokpilot Standard 59020 at \u003c\/em\u003e\u003ca href=\"https:\/\/www.esu.eu\/en\/downloads\/instruction-manuals\/digital-decoders\/\"\u003e\u003cem\u003ehttps:\/\/www.esu.eu\/en\/downloads\/instruction-manuals\/digital-decoders\/\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":32372183138392,"sku":"MRA-36-566A","price":89.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/36-566.jpg?v=1764975351"},{"product_id":"hornby-r8249-8-pin-4-function-2-sided-0-5a-1a-peak-decoder","title":"Hornby R8249 Standard 8 pin DCC Decoder (Ver. 1.3)","description":"\u003cp\u003eThe Standard 8 pin Decoder measures at 18mm in length and comes complete with wires shown.\u003c\/p\u003e\u003cp\u003eChip is selectable for operation with 14,28 or 128 Speed steps. 4-function 2-sided 0.5A (1A peak)\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":33324881936472,"sku":"HOR R8249","price":73.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/r8249.jpg?v=1771032696"},{"product_id":"branchline-36-568a-6-pin-dcc-loco-decoder-with-brake-button-function","title":"E-Z Command 36-568A 6-Pin DCC Loco-Decoder (with Brake)","description":"\u003cp\u003eA 6 Pin (NEM651) DCC Decoder suitable for models fitted with a 6 Pin DCC decoder socket\u003cbr\u003e\u003cem\u003e(do not use with the Graham Farish 3F ‘Jinty’ and Class 64XX Pannier Tank – use \u003cstrong\u003e36-556RA\u003c\/strong\u003e with these models).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003cbr\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003cbr\u003e4 powered function outputs (+2 logic level\/SUSI outputs)\u003cbr\u003e0.8A continuous load\u003cbr\u003eSuitable for models equipped with DC motors (including coreless motors)\u003cbr\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperating Modes\u003c\/strong\u003e\u003cbr\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003cbr\u003e14, 28 and 128 speed steps\u003cbr\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMotor Control Features\u003c\/strong\u003e\u003cbr\u003eSuitable for models equipped with DC motors (including coreless motors)\u003cbr\u003e0.8A continuous load\u003cbr\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003cbr\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFunction Outputs\u003c\/strong\u003e\u003cbr\u003e4 powered-function outputs with overload protection (2 outputs connect via solder pads)\u003cbr\u003e500mA load per output\u003cbr\u003e500mA total load of all function outputs\u003cbr\u003e2 additional logic level or SUSI outputs\u003cbr\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e14mm x 9mm x 2.5mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDefault Address\u003c\/strong\u003e\u003cbr\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgramming\u003c\/strong\u003e\u003cbr\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003cbr\u003eRailCom® Feedback system\u003cbr\u003eUpgradable firmware\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX618N18 at \u003c\/em\u003e\u003ca href=\"http:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cem\u003ewww.zimo.at\/web2010\/documents\/MX-KleineDecoder_E.pdf\u003c\/em\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":33699808542808,"sku":"MRA-36-568A","price":90.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/19346_Image1.jpg?v=1731707871"},{"product_id":"hornby-r7274-4-pin-decoder","title":"Hornby R7274 4 Pin DCC Decoder","description":"\u003csection\u003e\u003ch2\u003eProduct Info\u003c\/h2\u003eThe 4-pin decoder, previously only available as a spare (X9659), is compatible with the 0-4-0 W4 Peckett from the 2020 range.\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eTech Specs\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003eItem Length - Without Packaging (cm)\u003c\/dt\u003e\n\u003cdd\u003e11.5\u003c\/dd\u003e\n\u003cdt\u003eItem Scale\u003c\/dt\u003e\n\u003cdd\u003e1:76 Scale 00 Gauge\u003c\/dd\u003e\n\u003cdt\u003eFinish\u003c\/dt\u003e\n\u003cdd\u003ePainted\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003cdl\u003e\n\u003cdt\u003eColour\u003c\/dt\u003e\n\u003cdd\u003eMulti\u003c\/dd\u003e\n\u003cdt\u003eGauge\u003c\/dt\u003e\n\u003cdd\u003eOO\u003c\/dd\u003e\n\u003cdt\u003eOperator\u003c\/dt\u003e\n\u003cdd\u003eHornby\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003cdl\u003e\n\u003cdt\u003eDesigner\u003c\/dt\u003e\n\u003cdd\u003eHornby\u003c\/dd\u003e\n\u003c\/dl\u003e\u003c\/section\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":39404270846040,"sku":"HOR R7274","price":59.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/r7274_4-pin-decoder_rev2.jpg?v=1774647006"},{"product_id":"branchline-36-570-plux22-decoder-with-brake-button-function","title":"E-Z Command 36-570B PLUX22 Decoder (with Brake Button function)","description":"\u003cp\u003eA Plux22 (NEM658) DCC Decoder suitable for models fitted with a Plux22 DCC decoder socket.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder replaces item Nos. 36-570 and 36-570A and can be used in any model for which item Nos. 36-570 or 36-570A are recommended\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function\u003c\/p\u003e\u003cp\u003e10 powered function outputs (+2 servo or SUSI or logic level outputs)\u003c\/p\u003e\u003cp\u003e1.2A continuous load\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function\u003c\/p\u003e\u003cp\u003e14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003e1.2A continuous load\u003c\/p\u003e\u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e\u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e10 powered-function outputs with overload protection\u003c\/p\u003e\u003cp\u003e800mA load per output\u003c\/p\u003e\u003cp\u003e800mA total load of all function outputs\u003c\/p\u003e\u003cp\u003e2 additional servo or SUSI or logic level outputs\u003c\/p\u003e\u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e30mm x 15.3mm x 2.2mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom® Feedback system\u003c\/p\u003e\u003cp\u003eCapacitor connections\u003c\/p\u003e\u003cp\u003eUpgradable firmware\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MN330P22 at \u003c\/em\u003e\u003ca href=\"http:\/\/www.zimo.at\/web2010\/documents\/MX-KleineDecoder_E.pdf\"\u003e\u003cstrong\u003e\u003cem\u003ewww.zimo.at\/web2010\/documents\/MX-KleineDecoder_E.pdf\u003c\/em\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":39449133023320,"sku":"MRA-36-570B","price":98.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/36-570.jpg?v=1764975454"},{"product_id":"e-z-command-36-559-8-pin-to-21-pin-adaptor","title":"E-Z Command 36-559 8 Pin To 21 Pin Adaptor","description":"\u003cp\u003eThis adaptor will enables the use of an 8 Pin Decoder in a 21 Pin Locomotive.\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":39670617473112,"sku":"MRA-36-559","price":16.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/36-559.jpg?v=1716331470"},{"product_id":"e-z-command-36-564-8-pin-decoder-socket-with-wire-harness","title":"E-Z Command 36-564 8 Pin Decoder Socket with Harness","description":"\u003cp\u003e8 Pin Decoder Socket with wire harness\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":39670617505880,"sku":"MRA-36-564","price":21.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/36-564.jpg?v=1731707922"},{"product_id":"e-z-command-36-567a-next18-dcc-loco-decoder-with-brake-button-function","title":"E-Z Command 36-567A Next18 DCC Loco-Decoder (with Brake)","description":"\u003cp\u003eA Next18 (NEM662) DCC Decoder with brake Button function for realistic control.\u003cbr\u003eSuitable for models fitted with a Next18 DCC decoder socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003cbr\u003e4 powered function outputs (+2 logic level and 2 logic level\/SUSI outputs)\u003cbr\u003e0.7A continuous load\u003cbr\u003eSuitable for models equipped with DC motors (including coreless motors)\u003cbr\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003cbr\u003e14, 28 and 128 speed steps\u003cbr\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003cbr\u003e0.7A continuous load\u003cbr\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003cbr\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e4 powered-function outputs with overload protection.\u003cbr\u003e500mA load per output\u003cbr\u003e500mA total load of all function outputs\u003cbr\u003e2 additional logic level outputs and 2 logic level\/SUSI outputs\u003cbr\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e15mm x 9.5mm x 2.8mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDefault Address\u003c\/strong\u003e\u003cbr\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgramming\u003c\/strong\u003e\u003cbr\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003cbr\u003eRailCom® Feedback system\u003cbr\u003eUpgradable firmware\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX618N18 at \u003c\/em\u003e\u003ca href=\"http:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cem\u003ewww.zimo.at\/web2010\/documents\/MX-KleineDecoder_E.pdf\u003c\/em\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":39746431582296,"sku":"MRA-36-567A","price":90.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/36-567A.jpg?v=1731707929"},{"product_id":"e-z-command-36-058-21-pin-blanking-plug-10","title":"E-Z Command 36-058 21 Pin Blanking Plug (10)","description":"\u003cp\u003eE-Z Command\u003cbr\u003eProduct Code: 36-058\u003cbr\u003e21 Pin Blanking Plugs (10)\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":39921167925336,"sku":"MRA-36-058","price":29.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/products\/36-058.png?v=1650939733"},{"product_id":"digitrax-dz126t-1-amp-tiny-series-6-decoder-for-z-n-ho","title":"Digitrax DZ126T 1 Amp Tiny Series 6 decoder for Z N \u0026 HO","description":"\u003cp\u003eAll the great features and reliability of Digitrax decoders in a tiny package that will fit almost anywhere!\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0.55\" x 0.28\" x 0.128\" (14 x 7.13 x 3.25 mm)\u003c\/li\u003e\n\u003cli\u003eWorks with Z, N, and HO scale locos\u003c\/li\u003e\n\u003cli\u003e1 Amp\/1.25 Amps Peak Motor Current Rating\u003c\/li\u003e\n\u003cli\u003eDigitrax LocoMotion\u003csup\u003e?\u003c\/sup\u003e System\u003c\/li\u003e\n\u003cli\u003e2 FX\u003csup\u003e3\u003c\/sup\u003e Functions-500mA Total Function Current Rating\u003c\/li\u003e\n\u003cli\u003eFX\u003csup\u003e3\u003c\/sup\u003e optimized for LEDs or lamps\u003c\/li\u003e\n\u003cli\u003eConfigurable FX\u003csup\u003e3\u003c\/sup\u003e Pulse Function available on all function outputs.\u003c\/li\u003e\n\u003cli\u003eNew Series 6 features\u003c\/li\u003e\n\u003cli\u003eDue to the extremely small size of this decoder, it does not accept PX Power Xtenders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e?Works with many Z, N, and HO scale locomotives up to 16V track voltage\u003cbr\u003e?FX\u003csup\u003e3\u003c\/sup\u003e Function outputs for prototypical lighting effects and on\/off control:\u003cbr\u003e     Constant Brightness Lighting with directional or independent control.\u003cbr\u003e     Realistic Effects like Ditch lights, Mars lights, strobes, and many more\u003cbr\u003e     FX\u003csup\u003e3\u003c\/sup\u003e \u0026amp; Standard Function Qualifiers operate functions based on direction,\u003cbr\u003e     F0 on or off, direction and F0, and whether loco is moving.\u003cbr\u003e     FX3 effects optimized for selectable LED or lamp operation\u003cbr\u003e     Configurable FX\u003csup\u003e3\u003c\/sup\u003e Pulse Function available on all function outputs.\u003cbr\u003e     Function Remapping for custom function setup.\u003cbr\u003e     Master Light Switch turns off all lights \u0026amp; functions with one keystroke.\u003cbr\u003e     Advanced Consist Function Controls\u003cbr\u003e?Digitrax LocoMotion\u003csup\u003e?\u003c\/sup\u003e System-Your locomotives look like the real thing.\u003cbr\u003e     The Digitrax LocoMotion System makes them run like the real thing, too!\u003cbr\u003e     Torque Compensation for smooth as silk silent operation.\u003cbr\u003e     128 Speed Step operation (14 or 28 steps can also be used).\u003cbr\u003e     Momentum with acceleration and deceleration.\u003cbr\u003e     Normal Direction of Travel is user selectable.\u003cbr\u003e     Switching Speed feature for easier and faster access to yard speeds.\u003cbr\u003e     3 Step Speed Tables set start, mid and max voltage for custom control.\u003cbr\u003e     28 Step Speed Tables with 256 level resolution for precise control.\u003cbr\u003e?Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.\u003cbr\u003e?Series 6 Decoder Features.\u003cbr\u003e?2 Digit and 4 Digit Addressing.\u003cbr\u003e?Basic, Advanced \u0026amp; UniVersal Consisting.\u003cbr\u003e?SuperSonic motor drive for silent operation.\u003cbr\u003e?Direct mode programming.\u003cbr\u003e?Decoder Reset CV with or without speed table reset.\u003cbr\u003e?Transponder Equipped ready for transponding on your Layout.\u003cbr\u003e?Motor Isolation Protection helps prevent damage to your decoder.\u003cbr\u003e?DCC Compatible.\u003cbr\u003e?FCC Part 15, Class B RFI compliant.\u003cbr\u003e?Digitrax ?No Worries? Warranty.\u003c\/p\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":44205816807709,"sku":"DIG-DZ126T","price":87.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/products\/DZ126T_jpg_7d9f4071-56b7-4680-a314-f5499514ea85.jpg?v=1702528439"},{"product_id":"digitrax-dz146-1-amp-z-n-ho-scale-wired-mobile-decoder","title":"Digitrax DZ146 1 Amp Z N HO Scale Wired Mobile Decoder","description":"\u003cp\u003e\u003cstrong\u003eWired Motor \u0026amp; Function Decoder that fits many N and HO Scale Locos.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSize: .55” x .4” x .148”\u003cbr\u003e14mm x 10.23mm x 3.77mm\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eZ\/N\/HO Scale\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1.0 Amp\/1.5 Amps Peak\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 FX\u003csup\u003e3\u003c\/sup\u003e Functions, 0.5 Amp\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX\u003csup\u003e3\u003c\/sup\u003e\u003c\/strong\u003e Function outputs for prototypical lighting effects and on\/off control:\u003cbr\u003e\u003cstrong\u003eConstant Brightness Lighting\u003c\/strong\u003e with directional or independent control.\u003cbr\u003e\u003cstrong\u003eOptimized selectable LED or incandescent lamp operation\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRealistic Effects\u003c\/strong\u003e like Ditch lights, Mars lights, strobes, and many more\u003cbr\u003e\u003cstrong\u003eConfigurable Pulse Function\u003c\/strong\u003e available on all function outputs.\u003cbr\u003e\u003cstrong\u003eFX\u003csup\u003e3\u003c\/sup\u003e \u0026amp; Standard Function Qualifiers\u003c\/strong\u003e operate functions based on direction,\u003cbr\u003eF0 on or off, direction and F0, and whether loco is moving.\u003cbr\u003e\u003cstrong\u003eFunction Mapping\u003c\/strong\u003e for custom function setup.\u003cbr\u003e\u003cstrong\u003eMaster Light Switch\u003c\/strong\u003e turns off all lights \u0026amp; functions with one keystroke.\u003cbr\u003e\u003cstrong\u003eAdvanced Consist Function Controls.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigitrax LocoMotion\u003csup\u003e®\u003c\/sup\u003e System\u003c\/strong\u003e-Your locomotives look like the real thing.\u003cbr\u003eThe Digitrax LocoMotion System makes them run like the real thing, too!\u003cbr\u003e\u003cstrong\u003eScaleable Speed Stabilization (Back EMF)\u003c\/strong\u003e with simple setup \u0026amp; 256 level resolution.\u003cbr\u003e\u003cstrong\u003eTorque Compensation.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e128 Speed Step\u003c\/strong\u003e operation (14 or 28 steps can also be used).\u003cbr\u003e\u003cstrong\u003eMomentum\u003c\/strong\u003e with acceleration and deceleration.\u003cbr\u003e\u003cstrong\u003eNormal Direction of Travel\u003c\/strong\u003e is user selectable.\u003cbr\u003e\u003cstrong\u003eSwitching Speed\u003c\/strong\u003e feature for easier and faster access to yard speeds.\u003cbr\u003e\u003cstrong\u003e3 Step Speed Tables\u003c\/strong\u003e set start, mid and max voltage for custom control.\u003cbr\u003e\u003cstrong\u003e28 Step Speed Tables\u003c\/strong\u003e with 256 level resolution for precise control.\u003c\/li\u003e\n\u003cli\u003eProgram CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.\u003c\/li\u003e\n\u003cli\u003e2 Digit and 4 Digit Addressing.\u003c\/li\u003e\n\u003cli\u003eBasic, Advanced \u0026amp; UniVersal Consisting.\u003c\/li\u003e\n\u003cli\u003eSuperSonic motor drive for silent operation.\u003c\/li\u003e\n\u003cli\u003eDirect mode programming.\u003c\/li\u003e\n\u003cli\u003eDecoder Reset CV with or without speed table reset.\u003c\/li\u003e\n\u003cli\u003eTransponder Equipped ready for transponding on your Layout.\u003c\/li\u003e\n\u003cli\u003eMotor Isolation Protection helps prevent damage to your decoder.\u003c\/li\u003e\n\u003cli\u003eAutomatic Analog Mode Conversion when running on DC layout.\u003c\/li\u003e\n\u003cli\u003eDecoder Lock for individual programming of multiple decoders in one loco.\u003c\/li\u003e\n\u003cli\u003eDigitrax “No Worries” Warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":44205816873245,"sku":"DIG-DZ146","price":99.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/products\/DZ146D_jpg.jpg?v=1702528442"},{"product_id":"digitrax-dn136d","title":"Digitrax DN136D 1 Amp N \/ HO Scale Wired Mobile Decoder","description":"\u003cp\u003e\u003cstrong\u003eWired Motor \u0026amp; Function Decoder that fits many N and HO Scale Locos.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSize: .55” x .404” x .2”\u003cbr\u003e13.9mm x 10.3mm x 5 mm\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eN\/HO Scale\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1.0 Amp\/1.5 Amps Peak\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3 FX\u003csup\u003e3\u003c\/sup\u003e Functions, 0.5 Amp\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX\u003csup\u003e3\u003c\/sup\u003e\u003c\/strong\u003e Function outputs for prototypical lighting effects and on\/off control:\u003cbr\u003e\u003cstrong\u003eConstant Brightness Lighting\u003c\/strong\u003e with directional or independent control.\u003cbr\u003e\u003cstrong\u003eOptimized selectable LED or incandescent lamp operation\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRealistic Effects\u003c\/strong\u003e like Ditch lights, Mars lights, strobes, and many more\u003cbr\u003e\u003cstrong\u003eConfigurable Pulse Function\u003c\/strong\u003e available on all function outputs.\u003cbr\u003e\u003cstrong\u003eFX\u003csup\u003e3\u003c\/sup\u003e \u0026amp; Standard Function Qualifiers\u003c\/strong\u003e operate functions based on direction,\u003cbr\u003eF0 on or off, direction and F0, and whether loco is moving.\u003cbr\u003e\u003cstrong\u003eFunction Mapping\u003c\/strong\u003e for custom function setup.\u003cbr\u003e\u003cstrong\u003eMaster Light Switch\u003c\/strong\u003e turns off all lights \u0026amp; functions with one keystroke.\u003cbr\u003e\u003cstrong\u003eAdvanced Consist Function Controls.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigitrax LocoMotion\u003csup\u003e®\u003c\/sup\u003e System\u003c\/strong\u003e-Your locomotives look like the real thing.\u003cbr\u003eThe Digitrax LocoMotion System makes them run like the real thing, too!\u003cbr\u003e\u003cstrong\u003eScaleable Speed Stabilization (Back EMF)\u003c\/strong\u003e with simple setup \u0026amp; 256 level resolution.\u003cbr\u003e\u003cstrong\u003eTorque Compensation.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e128 Speed Step\u003c\/strong\u003e operation (14 or 28 steps can also be used).\u003cbr\u003e\u003cstrong\u003eMomentum\u003c\/strong\u003e with acceleration and deceleration.\u003cbr\u003e\u003cstrong\u003eNormal Direction of Travel\u003c\/strong\u003e is user selectable.\u003cbr\u003e\u003cstrong\u003eSwitching Speed\u003c\/strong\u003e feature for easier and faster access to yard speeds.\u003cbr\u003e\u003cstrong\u003e3 Step Speed Tables\u003c\/strong\u003e set start, mid and max voltage for custom control.\u003cbr\u003e\u003cstrong\u003e28 Step Speed Tables\u003c\/strong\u003e with 256 level resolution for precise control.\u003c\/li\u003e\n\u003cli\u003eProgram CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.\u003c\/li\u003e\n\u003cli\u003e2 Digit and 4 Digit Addressing.\u003c\/li\u003e\n\u003cli\u003eBasic, Advanced \u0026amp; UniVersal Consisting.\u003c\/li\u003e\n\u003cli\u003eSuperSonic motor drive for silent operation.\u003c\/li\u003e\n\u003cli\u003eDirect mode programming.\u003c\/li\u003e\n\u003cli\u003eDecoder Reset CV with or without speed table reset.\u003c\/li\u003e\n\u003cli\u003eTransponder Equipped ready for transponding on your Layout.\u003c\/li\u003e\n\u003cli\u003eMotor Isolation Protection helps prevent damage to your decoder.\u003c\/li\u003e\n\u003cli\u003eAutomatic Analog Mode Conversion when running on DC layout.\u003c\/li\u003e\n\u003cli\u003eDecoder Lock for individual programming of multiple decoders in one loco.\u003c\/li\u003e\n\u003cli\u003eDigitrax “No Worries” Warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eCurrent Rating-Motor\u003c\/dt\u003e\n\u003cdd\u003e1.0 Amp\/1.5 Amps Peak\u003c\/dd\u003e\n\u003cdt\u003eSize\u003c\/dt\u003e\n\u003cdd\u003e0.55” x 0.404” x 0.2” (13.9mm x 10.3mm x 5 mm)\u003c\/dd\u003e\n\u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eWired\u003c\/dd\u003e\n\u003cdt\u003eFunction Outputs\u003c\/dt\u003e\n\u003cdd\u003e3\u003c\/dd\u003e\n\u003cdt\u003eFunction Type\u003c\/dt\u003e\n\u003cdd\u003eFX3\u003c\/dd\u003e\n\u003cdt\u003eCurrent Rating-Functions\u003c\/dt\u003e\n\u003cdd\u003e0.5 Amp for all functions\u003c\/dd\u003e\n\u003cdt\u003eOriginal Release Date\u003c\/dt\u003e\n\u003cdd\u003e2014-03-14\u003c\/dd\u003e\n\u003cdt\u003eWarranty\u003c\/dt\u003e\n\u003cdd\u003eNo Worries Warranty\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":44686825652509,"sku":"DIG-DN136D","price":72.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/DIG-DN136D.jpg?v=1775015987"},{"product_id":"hornby-r7377-hm7070-power-bank-stay-alive","title":"Hornby R7377 HM7070 Power Bank (Stay alive) for HM7000 Decoders","description":"\u003ch2\u003eProduct Info\u003c\/h2\u003e\u003cp\u003eThe HM7070 Power Bank will keep locomotives running over any potential dead spots. It works in a similar way to 'stay alive' or capacitors which are available from other manufacturers.\u003c\/p\u003e\u003cp\u003eUse the HM7070 can be connected into the current range of HM7000 DCC Bluetooth decoders and sound decoders. A simple plug and socket means there's no wiring required!  \u003c\/p\u003e\u003cp\u003eWhy use one?\u003c\/p\u003e\u003cp\u003eYour layout will occasionally suffer from dirty track or small electrical dead spots at points and crossings. The small loss of power can cause locomotives to stop, but with DCC Sound Decoders it can also cause the sounds to reset and restart.  Avoid both issues with the HM7070 Power Bank - you'll have a few seconds of saved power to keep your locos going over that dead spot.\u003c\/p\u003e\u003cp\u003e(The Power Bank is not suitable for use without an HM7000 decoder, connecting it directly to other decoders or directly to the wiring of a model locomotive may cause damage to the Power Bank)\u003c\/p\u003e\u003ch4 data-pm-slice=\"1 1 []\"\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e*Please note: For DCC control of your HM7000-TXS, power your track using a compatible DCC controller (Hornby Select - R8213, Elite - R8214 or eLink - R8312. For Bluetooth® only control, power your track using a compatible power supply (P9102W – 1 Amp, P9302W – 4 Amp and P9602W – 1.2 Amp) and the HM7020 adapter, or \u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003ethe R7337 HM7020 4 Amp Bundle\u003c\/span\u003e. Correct function on any other DCC system or power supply cannot be guaranteed and may result in decoder failure.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003ePlease ensure that your smart device is able to download the HM | DCC app prior to the purchase of any HM7000 products.\u003c\/strong\u003e\u003c\/p\u003e\u003ch4 data-pm-slice=\"1 1 []\"\u003e\u003ca href=\"https:\/\/support.hornby.com\/hc\/en-gb\/articles\/8564947931548-HM7000-HM-DCC-Compatibility\"\u003eLearn more\u003c\/a\u003e\u003c\/h4\u003e\u003cp\u003eFor information on how to get started with HM7000 and the HM | DCC app, please visit \u003ca href=\"https:\/\/support.hornby.com\/hc\/en-gb\/sections\/6430190965522-Additional-Manuals\"\u003ehere\u003c\/a\u003e for Text-Based Tutorials, Instruction Manuals and Profile Function Maps.\u003c\/p\u003e\u003cp\u003eThe following points must be considered below when purchasing. HM | DCC and the HM7000 decoders have been extensively tested up to a range of 45 metres in plastic bodied locomotives and up to 12 metres in die-cast bodied locomotives. HM | DCC and the HM7000 decoders have been extensively tested up to a max of 14 non-stationary, running locomotives. HM | DCC and the HM7000 decoders have been extensively tested on iOS devices dating as far back as 5 years from today's date. Any devices older than this cannot be commented on for proper function by Hornby Hobbies. Please ensure that the \u003ca href=\"https:\/\/d63oxfkn1m8sf.cloudfront.net\/2716\/7336\/2071\/HM.DCC_-_HM7000_Incompatible_Device_List_9-1-2023.pdf\" target=\"_blank\"\u003eincompatibility list\u003c\/a\u003e is considered prior to any purchase.\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":45614551302429,"sku":"HOR R7377","price":46.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/r7377_1.jpg?v=1771290099"},{"product_id":"hornby-r7322-hm7000-21txs-bluetooth®-dcc-sound-decoder-21-pin","title":"Hornby R7322 HM7000-21TXS: Bluetooth® \u0026 DCC Sound Decoder (21-pin)","description":"\u003ch4 data-pm-slice=\"1 1 []\"\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e*Please note: For DCC control of your HM7000-TXS Decoder, power your track using a compatible DCC controller (Hornby Select - R8213, Elite - R8214 or eLink - R8312. For Bluetooth® only control, power your track using a compatible power supply (P9102W – 1 Amp, P9302W – 4 Amp and P9602W – 1.2 Amp) and the HM7020 adapter, or \u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003ethe R7337 HM7020 4 Amp Bundle\u003c\/span\u003e. Correct function on any other DCC system or power supply cannot be guaranteed and may result in decoder failure.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003eHM7000-TXS Decoders do not function on analogue control!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4 data-pm-slice=\"1 1 []\"\u003ePlease ensure that your smart device is able to download the HM | DCC app prior to the purchase of any HM7000 products.\u003c\/h4\u003e\u003cp\u003eThe following points must be considered below when purchasing. HM | DCC and the HM7000 decoders have been extensively tested up to a range of 45 metres in plastic bodied locomotives and up to 12 metres in die-cast bodied locomotives. HM | DCC and the HM7000 decoders have been extensively tested up to a max of 14 non-stationary, running locomotives. HM | DCC and the HM7000 decoders have been extensively tested on iOS devices dating as far back as 5 years from today's date. Any devices older than this cannot be commented on for proper function by Hornby Hobbies. Please ensure that the \u003ca href=\"https:\/\/d63oxfkn1m8sf.cloudfront.net\/2716\/7336\/2071\/HM.DCC_-_HM7000_Incompatible_Device_List_9-1-2023.pdf\" target=\"_blank\"\u003eincompatibility list\u003c\/a\u003e is considered prior to any purchase.\u003c\/p\u003e\u003cp\u003eFor information on how to get started with HM7000 and the HM | DCC app, please visit \u003ca href=\"https:\/\/www.hornbyhobbies.co.uk\/index.php?cID=135831\"\u003ehere\u003c\/a\u003e for Text-Based Tutorials, Instruction Manuals and Profile Function Maps.\u003c\/p\u003e\u003cp\u003eOr simply click \u003ca href=\"http:\/\/youtube.com\/playlist?list=PLdNqiK7_F42uWgBdQ4HdgqQms7XnSUN73\"\u003ehere \u003c\/a\u003eto follow our YouTube Tutorials.\u003c\/p\u003e\u003cp\u003eFor specialised assistance, please contact \u003ca href=\"mailto:HM.customercare@hornby.com\"\u003eHM.customercare@hornby.com\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eProduct Info\u003c\/h2\u003e\u003cp\u003ePart of the innovative new HM7000 range, this 21-pin Bluetooth® and DCC sound decoder is ready to plug into locomotives featuring a 21-pin (NEM660) socket. You'll find the 21-pin socket in Hornby \u0026amp; Bachmann Branchline OO locomotives in particular, plus many others in OO \u0026amp; HO.\u003c\/p\u003e\u003cp\u003eThe decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA. Making it highly suitable for most 00 and HO scale locos.\u003c\/p\u003e\u003cp\u003eThis decoder also has sound capabilities and comes with a high quality 'sugar-cube' miniature speaker. This is quickly and easily plugged into a socket on the decoder.\u003c\/p\u003e\u003cp\u003eAlso included are assorted 'speaker enclosures'. When installing the speaker inside your locomotive, picking the largest enclosure which will fit inside the loco body will give the best sound reproduction from your speaker.\u003c\/p\u003e\u003cp\u003eDownload your first set of sounds and install them via the HM7000 app - you can download different sound packs and change those on your decoder later if you wish.\u003c\/p\u003e\u003cp\u003eAn R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points - keeping the sounds operating and the loco moving. \u003c\/p\u003e\u003ch2\u003eWhat's Inside\u003c\/h2\u003e\u003cp\u003e1 Decoder, 1 Sugar-cube Speaker, 1 set of assorted speaker enclosures.\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":45614554317085,"sku":"HOR R7322","price":196.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/r7322_1.jpg?v=1770953819"},{"product_id":"hornby-r7345-hm7000-n18txs-bluetooth®-dcc-sound-decoder-next18-pin","title":"Hornby R7345 HM7000-N18TXS: Bluetooth® \u0026 DCC Sound Decoder (Next18-pin)","description":"\u003ch4 data-pm-slice=\"1 1 []\"\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e*Please note: For DCC control of your HM7000-TXS Decoder, power your track using a compatible DCC controller (Hornby Select - R8213, Elite - R8214 or eLink - R8312. For Bluetooth® only control, power your track using a compatible power supply (P9102W – 1 Amp, P9302W – 4 Amp and P9602W – 1.2 Amp) and the HM7020 adapter, or \u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003ethe R7337 HM7020 4 Amp Bundle\u003c\/span\u003e. Correct function on any other DCC system or power supply cannot be guaranteed and may result in decoder failure.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003eHM7000-TXS Decoders do not function on analogue control!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4 data-pm-slice=\"1 1 []\"\u003ePlease ensure that your smart device is able to download the HM | DCC app prior to the purchase of any HM7000 products.\u003c\/h4\u003e\u003cp\u003eThe following points must be considered below when purchasing. HM | DCC and the HM7000 decoders have been extensively tested up to a range of 45 metres in plastic bodied locomotives and up to 12 metres in die-cast bodied locomotives. HM | DCC and the HM7000 decoders have been extensively tested up to a max of 14 non-stationary, running locomotives. HM | DCC and the HM7000 decoders have been extensively tested on iOS devices dating as far back as 5 years from today's date. Any devices older than this cannot be commented on for proper function by Hornby Hobbies. Please ensure that the \u003ca href=\"https:\/\/d63oxfkn1m8sf.cloudfront.net\/2716\/7336\/2071\/HM.DCC_-_HM7000_Incompatible_Device_List_9-1-2023.pdf\" target=\"_blank\"\u003eincompatibility list\u003c\/a\u003e is considered prior to any purchase.\u003c\/p\u003e\u003cp\u003eFor information on how to get started with HM7000 and the HM | DCC app, please visit \u003ca href=\"https:\/\/www.hornbyhobbies.co.uk\/index.php?cID=135831\"\u003ehere\u003c\/a\u003e for Text-Based Tutorials, Instruction Manuals and Profile Function Maps.\u003c\/p\u003e\u003cp\u003eOr simply click \u003ca href=\"http:\/\/youtube.com\/playlist?list=PLdNqiK7_F42uWgBdQ4HdgqQms7XnSUN73\"\u003ehere \u003c\/a\u003eto follow our YouTube Tutorials.\u003c\/p\u003e\u003cp\u003eFor specialised assistance, please contact \u003ca href=\"mailto:HM.customercare@hornby.com\"\u003eHM.customercare@hornby.com\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eProduct Info\u003c\/h2\u003e\u003cp\u003ePart of the innovative HM7000 range, the Next18-pin Bluetooth® and DCC sound decoder is ready to plug into locomotives featuring a Next18 (NEM662*) socket. The Next18 socket is found in modern Hornby locos, many other locomotives in 00, H0 and some smaller scale locomotives.\u003c\/p\u003e\u003cp\u003eThe decoder is designed to supply 500mA continuous load to the main motor and a peak demand of 1,000mA, making it highly suitable for most 00 and H0 scale locos.\u003c\/p\u003e\u003cp\u003eThe decoder also has sound capabilities and comes with a high quality 'sugar-cube' miniature speaker. This is quickly and easily plugged into a socket on the decoder. Download the free HM|DCC app for access to the range of free to download sound profiles.\u003c\/p\u003e\u003cp\u003eAlso included are assorted speaker enclosures. When installing the speaker inside the locomotive, picking the largest enclosure which will fit inside the loco body will give the best sound reproduction from the speaker.\u003c\/p\u003e\u003cp\u003e*please note, this decoder does not meet NEM662 space requirements. Please check the locomotive has sufficient space prior to purchasing.\u003c\/p\u003e\u003ch2\u003eWhat's Inside\u003c\/h2\u003e\u003cp\u003e1 Decoder, 1 Sugar-cube Speaker, 1 set of assorted speaker enclosures.\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":45614559592733,"sku":"HOR R7345","price":179.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/r7345_1.jpg?v=1771368202"},{"product_id":"hornby-r7336-hm7000-8txs-bluetooth®-dcc-sound-decoder-8-pin","title":"Hornby R7336 HM7000-8TXS: Bluetooth® \u0026 DCC Sound Decoder (8-pin)","description":"\u003ch4 data-pm-slice=\"1 1 []\"\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e*Please note: For DCC control of your HM7000-TXS Decoder, power your track using a compatible DCC controller (Hornby Select - R8213, Elite - R8214 or eLink - R8312. For Bluetooth® only control, power your track using a compatible power supply (P9102W – 1 Amp, P9302W – 4 Amp and P9602W – 1.2 Amp) and the HM7020 adapter, or \u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003ethe R7337 HM7020 4 Amp Bundle\u003c\/span\u003e. Correct function on any other DCC system or power supply cannot be guaranteed and may result in decoder failure.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003eHM7000-TXS Decoders do not function on analogue control!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4 data-pm-slice=\"1 1 []\"\u003ePlease ensure that your smart device is able to download the HM | DCC app prior to the purchase of any HM7000 products.\u003c\/h4\u003e\u003cp\u003eThe following points must be considered below when purchasing. HM | DCC and the HM7000 decoders have been extensively tested up to a range of 45 metres in plastic bodied locomotives and up to 12 metres in die-cast bodied locomotives. HM | DCC and the HM7000 decoders have been extensively tested up to a max of 14 non-stationary, running locomotives. HM | DCC and the HM7000 decoders have been extensively tested on iOS devices dating as far back as 5 years from today's date. Any devices older than this cannot be commented on for proper function by Hornby Hobbies. Please ensure that the \u003ca href=\"https:\/\/d63oxfkn1m8sf.cloudfront.net\/2716\/7336\/2071\/HM.DCC_-_HM7000_Incompatible_Device_List_9-1-2023.pdf\" target=\"_blank\"\u003eincompatibility list\u003c\/a\u003e is considered prior to any purchase.\u003c\/p\u003e\u003cp\u003eFor information on how to get started with HM7000 and the HM | DCC app, please visit \u003ca href=\"https:\/\/www.hornbyhobbies.co.uk\/index.php?cID=135831\"\u003ehere\u003c\/a\u003e for Text-Based Tutorials, Instruction Manuals and Profile Function Maps.\u003c\/p\u003e\u003cp\u003eOr simply click \u003ca href=\"http:\/\/youtube.com\/playlist?list=PLdNqiK7_F42uWgBdQ4HdgqQms7XnSUN73\"\u003ehere \u003c\/a\u003eto follow our YouTube Tutorials.\u003c\/p\u003e\u003cp\u003eFor specialised assistance, please contact \u003ca href=\"mailto:HM.customercare@hornby.com\"\u003eHM.customercare@hornby.com\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eProduct Info\u003c\/h2\u003e\u003cp\u003ePart of the innovative new HM7000 range, this 8-pin Bluetooth® and DCC sound decoder is ready to plug into locomotives featuring a 8-pin (NEM652) socket. You'll find the 8 pin socket in Hornby locos and many other locomotives in OO, HO and some smaller scale locomotives.\u003c\/p\u003e\u003cp\u003eThe decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA. Making it highly suitable for most OO and HO scale locos.\u003c\/p\u003e\u003cp\u003eThis decoder also has sound capabilities and comes with a high quality 'sugar-cube' miniature speaker. This is quickly and easily plugged into a socket on the decoder.\u003c\/p\u003e\u003cp\u003eAlso included are assorted 'speaker enclosures'. When installing the speaker inside your locomotive, picking the largest enclosure which will fit inside the loco body will give the best sound reproduction from your speaker.\u003c\/p\u003e\u003cp\u003eDownload your first set of sounds and install them via the HM7000 app - you can download different sound packs and change those on your decoder later if you wish.\u003c\/p\u003e\u003cp\u003eAn R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points - keeping the sounds operating and the loco moving.\u003c\/p\u003e\u003ch2\u003eWhat's Inside\u003c\/h2\u003e\u003cp\u003e1x HM7000 8 pin decoder, speaker \u0026amp; enclosures.\u003c\/p\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":45614562672925,"sku":"HOR R7336","price":183.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/r7336_1.jpg?v=1783564709"},{"product_id":"e-z-command-36-571-e-z-command-6-pin-micro-dcc-loco-decoder-with-brake-button-function","title":"E-Z Command 36-571 E-Z Command 6 Pin Micro DCC Loco-Decoder (with Brake Button function)","description":"\u003cp\u003eA 6-Pin (NEM651) DCC Decoder suitable for models fitted with a 6 Pin DCC decoder socket and where minimal space is available for the decoder, for instance the Graham Farish Class N Scale 03 and 04 Diesel Shunters and the Bachmann Narrow Gauge OO9 Scale Quarry Hunslets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol and DC Analogue) with Back EMF function\u003c\/p\u003e\u003cp\u003e6 powered function outputs\u003c\/p\u003e\u003cp\u003e0.7A continuous load\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol and DC Analogue) with Back EMF function\u003c\/p\u003e\u003cp\u003e14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003e0.7A continuous load\u003c\/p\u003e\u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e\u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e6 powered-function outputs with overload protection (4 outputs connect via solder pads)\u003c\/p\u003e\u003cp\u003e500mA load per output\u003c\/p\u003e\u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e\u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e8mm x 8mm x 2.4mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom® Feedback system\u003c\/p\u003e\u003cp\u003eUpgradable firmware\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX616N at \u003c\/em\u003e\u003ca href=\"http:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\"\u003e\u003cstrong\u003ehttp:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":46940597846301,"sku":"EZC-36-571","price":133.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/36-571-1.jpg?v=1731707976"},{"product_id":"e-z-command-36-569-21mtc-decoder-for-branchline-oo-class-90-diesels","title":"E-Z Command 36-569 21MTC Decoder (for Branchline [OO] Class 90 Diesels)","description":"\u003cp\u003eA 21 Pin (21MTC) DCC Decoder configured for use in the Bachmann Branchline Class 90 (item No. 32-61x). Configured to control the servo-motor-operated Pantograph.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003cbr\u003eDual-mode DCC\/DC decoder with Back EMF function\u003cbr\u003e1.2A continuous load\u003cbr\u003eBrake Button function for realistic control of braking\u003cbr\u003eControls the servo-motor-operated Pantograph\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Functions when fitted to Bachmann Branchline Class 90\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eF0 - Direction Lights on\/off\u003c\/p\u003e\u003cp\u003eF1 - Cab Lights (Directional) on\/off\u003c\/p\u003e\u003cp\u003eF2 - Brake Button\u003c\/p\u003e\u003cp\u003eF3 - Day\/Night Mode\u003c\/p\u003e\u003cp\u003eF4 - Direction Lights Off (Non-Pantograph End)\u003c\/p\u003e\u003cp\u003eF5 - Direction Lights Off (Pantograph End)\u003c\/p\u003e\u003cp\u003eF6 - Pantograph Up\/Down\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eNMRA\/DCC with 14, 28 and 128 speed steps\u003cbr\u003eShort and Long addresses\u003cbr\u003eDCC and DC operation (DC operation is de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e1.2A continuous load\u003cbr\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003cbr\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePre-configured to operate lights and servo-motor-controlled Pantograph\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e20.5mm x 15.5mm x 3.5mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom? Feedback system\u003cbr\u003eCapacitor connections\u003c\/p\u003e\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX618N18 at \u003c\/em\u003e\u003ca href=\"http:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cem\u003ewww.zimo.at\/web2010\/documents\/MX-KleineDecoder_E.pdf\u003c\/em\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":47179251286301,"sku":"MRA-36-569","price":89.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/products\/36-569_64f8deba-223a-47c9-af35-ee9275a9bf38.png?v=1700518694"},{"product_id":"e-z-command-36-569a-21mtc-dcc-loco-decoder-for-class-90-with-servo-motor-operation-brake-function","title":"E-Z Command 36-569A 21MTC DCC Loco-Decoder (for Class 90) with Servo Motor Operation \u0026 Brake function","description":"\u003cp\u003eA 21 Pin (21MTC) DCC Decoder configured for use in the Bachmann Branchline Class 90 ? \u003cstrong\u003emodels produced from 2021 onwards\u003c\/strong\u003e. Configured to control the servo-motor-operated Pantograph.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDual-mode DCC\/DC decoder with Back EMF function\u003c\/p\u003e\u003cp\u003e1.2A continuous load\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking\u003c\/p\u003e\u003cp\u003eControls the servo-motor-operated Pantograph\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Functions when fitted to Bachmann Branchline Class 90\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eF0 - Direction Lights on\/off\u003c\/p\u003e\u003cp\u003eF1 - Cab Lights (Directional) on\/off\u003c\/p\u003e\u003cp\u003eF2 - Brake Button\u003c\/p\u003e\u003cp\u003eF3 - Day\/Night Mode\u003c\/p\u003e\u003cp\u003eF4 - Direction Lights Off (Non-Pantograph End)\u003c\/p\u003e\u003cp\u003eF5 - Direction Lights Off (Pantograph End)\u003c\/p\u003e\u003cp\u003eF6 - Pantograph Up\/Down\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNMRA\/DCC with 14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003eDCC and DC operation (DC operation is de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1.2A continuous load\u003c\/p\u003e\u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e\u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePre-configured to operate lights and servo-motor-controlled Pantograph\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e20.5mm x 15.5mm x 3.5mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom? Feedback system\u003c\/p\u003e\u003cp\u003eCapacitor connections\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX634C at \u003c\/em\u003e\u003ca href=\"http:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\"\u003e\u003cstrong\u003ehttp:\/\/www.zimo.at\/web2010\/documents\/MX-small-decoders_EN.pdf\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":47179251745053,"sku":"BAC-36-569A","price":108.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/products\/36-569A-1.jpg?v=1705358031"},{"product_id":"e-z-command-36-567b-next18-dcc-loco-decoder-with-brake-button-function","title":"E-Z Command 36-567B Next18 DCC Loco-Decoder (with Brake Button function)","description":"\u003cp\u003eA Next18 (NEM662) DCC Decoder suitable for models fitted with a Next18 DCC decoder socket.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder replaces item Nos. 36-567 and 36-567A and can be used in any model for which item Nos. 36-567 or 36-567A are recommended\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue) with Back EMF function\u003c\/p\u003e\u003cp\u003e4 powered function outputs (+2 logic level and 2 logic level\/SUSI\/Servo outputs)\u003c\/p\u003e\u003cp\u003e0.7A continuous load\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003e \u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue) with Back EMF function\u003c\/p\u003e\u003cp\u003e14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003e0.7A continuous load\u003c\/p\u003e\u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e\u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e4 powered-function outputs with overload protection.\u003c\/p\u003e\u003cp\u003e500mA load per output\u003c\/p\u003e\u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e\u003cp\u003e2 additional logic level outputs and 2 logic level\/SUSI outputs\u003c\/p\u003e\u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e13.3mm x 9.5mm x 2.6mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom? Feedback system\u003c\/p\u003e\u003cp\u003eUpgradable firmware\u003c\/p\u003e\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MN180N18 at \u003c\/em\u003e\u003cem\u003ehttp:\/\/www.zimo.at\/web2010\/documents\/MS-MN-Decoder.pdf\u003c\/em\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":47429419434269,"sku":"EZC-36-567B","price":113.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/products\/EZC-36-567B.jpg?v=1705366973"},{"product_id":"ez-command-36-557a-21-pin-dcc-loco-decoder-with-brake-button-function","title":"E-Z Command 36-557A 21-Pin DCC Loco-Decoder (with Brake)","description":"\u003cp\u003eA 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(184, 49, 47);\"\u003e (do not use with the Bachmann Branchline Class 90 – use \u003cstrong\u003e36-569A\u003c\/strong\u003e with these models).\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder replaces item No. 36-557 and can be used in any model for which item No. 36-557 is recommended\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDual-mode DCC\/DC decoder with Back EMF function\u003c\/p\u003e\u003cp\u003e10 powered function outputs (+8 logic level outputs and 2 logic level\/SUSI outputs)\u003c\/p\u003e\u003cp\u003e1.5A continuous load\u003c\/p\u003e\u003cp\u003eRailComPlus® for automatic registration when used with selected DCC systems\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNMRA\/DCC with 14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003eDCC and DC operation (DC operation is de-selectable)\u003c\/p\u003e\u003cp\u003eAutomatic recognition of operational mode and DCC speed step selection\u003c\/p\u003e\u003cp\u003eSupports Lenz® LG 100 braking sections\u003c\/p\u003e\u003cp\u003eSupports ABC braking sections\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003e1.5A continuous load\u003c\/p\u003e\u003cp\u003eMotor regulation with pulse width frequency from 10kHz to 50kHz\u003c\/p\u003e\u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e10 powered function outputs with overload protection (4 via 21MTC pins, 6 via solder pads)\u003c\/p\u003e\u003cp\u003e10 logic level outputs (8 via 21MTC pins, 2 via solder pads)\u003c\/p\u003e\u003cp\u003e250mA load per output\u003c\/p\u003e\u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e\u003cp\u003e2 additional logic outputs\u003c\/p\u003e\u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e21.4mm x 15.5mm x 4.5mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom® Feedback system\u003c\/p\u003e\u003cp\u003eRailComPlus® automatic Registration\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis decoder is manufactured on behalf of Bachmann Europe by ESU. For full technical specifications and instructions, please refer to the ESU user guide for Lokpilot 5 DCC 59629 at \u003c\/em\u003e\u003cem\u003ehttps:\/\/www.esu.eu\/en\/downloads\/instruction-manuals\/digital-decoders\/\u003c\/em\u003e\u003c\/p\u003e","brand":"E-Z Command","offers":[{"title":"Default Title","offer_id":47496818622749,"sku":"EZC-36-557A","price":99.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/EZC-36-557A.jpg?v=1764975652"},{"product_id":"digitrax-dh127d-series-7-mobile-decoders","title":"Digitrax DH127D  Series 7 Mobile Decoders","description":"\u003cul\u003e\n\u003cli\u003eFits many HO locomotives\u003c\/li\u003e\n\u003cli\u003eDigitrax 9-Pin Harness Socket\u003c\/li\u003e\n\u003cli\u003e1.0 Amp\/2 Amps Peak\u003c\/li\u003e\n\u003cli\u003e2 FX7 Functions, 200ma Output\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":49031144472861,"sku":"DIG-DH127D","price":72.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/DIG-DH127D.jpg?v=1778829734"},{"product_id":"digitrax-sdxh187mt-ho-scale-series-7-sound-decoder-21mtc","title":"Digitrax SDXH187MT HO Scale Series 7 Sound Decoder (21MTC)","description":"\u003cul\u003e\n\u003cli\u003e8 CV-Selectable Steam \u0026amp; Diesel Sound Schemes Included\u003c\/li\u003e\n\u003cli\u003eMobile Decoder with SoundFX v3\u003c\/li\u003e\n\u003cli\u003eFits many HO locomotives\u003c\/li\u003e\n\u003cli\u003e21MTC interface\u003c\/li\u003e\n\u003cli\u003eMotor 1.0 Amp\/2 Amps Peak\u003c\/li\u003e\n\u003cli\u003e8 FX3 Functions, 200ma Output\u003c\/li\u003e\n\u003cli\u003eNew sound .spjs loadable with Digitrax USB programmer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":49445187584285,"sku":"DIG-SDXH187MT","price":198.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/DIG-SDXH187MT.jpg?v=1739406693"},{"product_id":"hornby-r7321-oo-hm7000-6-bluetooth®-dcc-decoder-6-pin","title":"Hornby R7321 OO HM7000-6: Bluetooth® \u0026 DCC Decoder (6-pin)","description":"\u003ch4 data-pm-slice=\"1 1 []\"\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e*Please note: For DCC control of your HM7000 Decoder, power your track using a compatible DCC controller (Hornby Select - R8213, Elite - R8214 or eLink - R8312. For Bluetooth® only control, power your track using a compatible power supply (P9102W – 1 Amp, P9302W – 4 Amp and P9602W – 1.2 Amp) and the HM7020 adapter, or \u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003ethe R7337 HM7020 4 Amp Bundle\u003c\/span\u003e. Correct function on any other DCC system or power supply cannot be guaranteed and may result in decoder failure.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003eHM7000 Decoders do not function on analogue control!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4 data-pm-slice=\"1 1 []\"\u003ePlease ensure that your smart device is able to download the HM | DCC app prior to the purchase of any HM7000 products.\u003c\/h4\u003e\u003cp\u003eThe following points must be considered below when purchasing. HM | DCC and the HM7000 decoders have been extensively tested up to a range of 45 metres in plastic bodied locomotives and up to 12 metres in die-cast bodied locomotives. HM | DCC and the HM7000 decoders have been extensively tested up to a max of 14 non-stationary, running locomotives. HM | DCC and the HM7000 decoders have been extensively tested on iOS devices dating as far back as 5 years from today's date. Any devices older than this cannot be commented on for proper function by Hornby Hobbies. Please ensure that the \u003ca href=\"https:\/\/d63oxfkn1m8sf.cloudfront.net\/2716\/7336\/2071\/HM.DCC_-_HM7000_Incompatible_Device_List_9-1-2023.pdf\" target=\"_blank\"\u003eincompatibility list\u003c\/a\u003e is considered prior to any purchase.\u003c\/p\u003e\u003cp\u003eFor information on how to get started with HM7000 and the HM | DCC app, please visit \u003ca href=\"https:\/\/www.hornbyhobbies.co.uk\/index.php?cID=135831\"\u003ehere\u003c\/a\u003e for Text-Based Tutorials, Instruction Manuals and Profile Function Maps.\u003c\/p\u003e\u003cp\u003eOr simply click \u003ca href=\"http:\/\/youtube.com\/playlist?list=PLdNqiK7_F42uWgBdQ4HdgqQms7XnSUN73\"\u003ehere \u003c\/a\u003eto follow our YouTube Tutorials.\u003c\/p\u003e\u003cp\u003eFor specialised assistance, please contact \u003ca href=\"mailto:HM.customercare@hornby.com\"\u003eHM.customercare@hornby.com\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eProduct Info\u003c\/h2\u003e\u003cp\u003ePart of the innovative new HM7000 range, this 6-pin Bluetooth® and DCC decoder is perfect for getting smaller locomotives working on the HM7000 system. \u003c\/p\u003e\u003cp\u003eThe decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA, making it highly suitable for most N scale locos and small TT, HO and OO locomotives.\u003c\/p\u003e\u003cp\u003e**\u003c\/p\u003e\u003cp\u003eAn R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points.\u003c\/p\u003e\u003ch2\u003eWhat's Inside\u003c\/h2\u003e\u003cp\u003e1x HM7000 6 Pin Bluetooth \u0026amp; DCC Decoder (non-sound), 1x Instructions\u003c\/p\u003e\u003ch2\u003eTech Specs\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eItem Length - Without Packaging (cm)\u003c\/dt\u003e\n\u003cdd\u003e1.7\u003c\/dd\u003e\n\u003cdt\u003eItem Height - Without Packaging (cm)\u003c\/dt\u003e\n\u003cdd\u003e0.8\u003c\/dd\u003e\n\u003cdt\u003eItem Width - Without Packaging (cm)\u003c\/dt\u003e\n\u003cdd\u003e0.45\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cdl\u003e\n\u003cdt\u003eItem Weight - Without Packaging (kg)\u003c\/dt\u003e\n\u003cdd\u003e0.002\u003c\/dd\u003e\n\u003cdt\u003eLicense\u003c\/dt\u003e\n\u003cdd\u003eNo\u003c\/dd\u003e\n\u003cdt\u003eDCC Status\u003c\/dt\u003e\n\u003cdd\u003eDCC Decoder - 6 Pin\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cdl\u003e\n\u003cdt\u003eNumber of Parts\u003c\/dt\u003e\n\u003cdd\u003e1\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":50952138785053,"sku":"HOR R7321","price":89.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/HOR_20R7321.jpg?v=1771297912"},{"product_id":"hornby-r7335-oo-hm7000-8-bluetooth®-dcc-decoder-8-pin","title":"Hornby R7335 OO HM7000-8: Bluetooth® \u0026 DCC Decoder (8-pin)","description":"\u003ch4 data-pm-slice=\"1 1 []\"\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e*Please note: For DCC control of your HM7000 Decoder, power your track using a compatible DCC controller (Hornby Select - R8213, Elite - R8214 or eLink - R8312. For Bluetooth® only control, power your track using a compatible power supply (P9102W – 1 Amp, P9302W – 4 Amp and P9602W – 1.2 Amp) and the HM7020 adapter, or \u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003ethe R7337 HM7020 4 Amp Bundle\u003c\/span\u003e. Correct function on any other DCC system or power supply cannot be guaranteed and may result in decoder failure.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\u003cp\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px; color: rgb(226, 80, 65);\"\u003e\u003cstrong\u003eHM7000 Decoders do not function on analogue control!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4 data-pm-slice=\"1 1 []\"\u003ePlease ensure that your smart device is able to download the HM | DCC app prior to the purchase of any HM7000 products.\u003c\/h4\u003e\u003cp\u003eThe following points must be considered below when purchasing. HM | DCC and the HM7000 decoders have been extensively tested up to a range of 45 metres in plastic bodied locomotives and up to 12 metres in die-cast bodied locomotives. HM | DCC and the HM7000 decoders have been extensively tested up to a max of 14 non-stationary, running locomotives. HM | DCC and the HM7000 decoders have been extensively tested on iOS devices dating as far back as 5 years from today's date. Any devices older than this cannot be commented on for proper function by Hornby Hobbies. Please ensure that the \u003ca href=\"https:\/\/d63oxfkn1m8sf.cloudfront.net\/2716\/7336\/2071\/HM.DCC_-_HM7000_Incompatible_Device_List_9-1-2023.pdf\" target=\"_blank\"\u003eincompatibility list\u003c\/a\u003e is considered prior to any purchase.\u003c\/p\u003e\u003cp\u003eFor information on how to get started with HM7000 and the HM | DCC app, please visit \u003ca href=\"https:\/\/www.hornbyhobbies.co.uk\/index.php?cID=135831\"\u003ehere\u003c\/a\u003e for Text-Based Tutorials, Instruction Manuals and Profile Function Maps.\u003c\/p\u003e\u003cp\u003eOr simply click \u003ca href=\"http:\/\/youtube.com\/playlist?list=PLdNqiK7_F42uWgBdQ4HdgqQms7XnSUN73\"\u003ehere \u003c\/a\u003eto follow our YouTube Tutorials.\u003c\/p\u003e\u003cp\u003eFor specialised assistance, please contact \u003ca href=\"mailto:HM.customercare@hornby.com\"\u003eHM.customercare@hornby.com\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eProduct Info\u003c\/h2\u003e\u003cp\u003ePart of the innovative new HM7000 range, this 8-pin Bluetooth® and DCC decoder is perfect for getting OO scale locomotives working on the HM7000 system. The 8 pin socket has historicaly been fitted to Hornby locomotives manufactured prior to 2022.\u003c\/p\u003e\u003cp\u003eThe decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA. \u003c\/p\u003e\u003cp\u003e**\u003c\/p\u003e\u003cp\u003eAn R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points.\u003c\/p\u003e\u003ch2\u003eWhat's Inside\u003c\/h2\u003e\u003cp\u003e1x HM7000 8 Pin Bluetooth \u0026amp; DCC Decoder (non-sound), 1x Instructions\u003c\/p\u003e\u003ch2\u003eTech Specs\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eItem Length - Without Packaging (cm)\u003c\/dt\u003e\n\u003cdd\u003e1.7\u003c\/dd\u003e\n\u003cdt\u003eItem Height - Without Packaging (cm)\u003c\/dt\u003e\n\u003cdd\u003e0.8\u003c\/dd\u003e\n\u003cdt\u003eItem Width - Without Packaging (cm)\u003c\/dt\u003e\n\u003cdd\u003e0.45\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cdl\u003e\n\u003cdt\u003eItem Weight - Without Packaging (kg)\u003c\/dt\u003e\n\u003cdd\u003e0.002\u003c\/dd\u003e\n\u003cdt\u003eLicense\u003c\/dt\u003e\n\u003cdd\u003eNo\u003c\/dd\u003e\n\u003cdt\u003eDCC Status\u003c\/dt\u003e\n\u003cdd\u003eDCC Decoder - 8 Pin\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cdl\u003e\n\u003cdt\u003eNumber of Parts\u003c\/dt\u003e\n\u003cdd\u003e1\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Hornby","offers":[{"title":"Default Title","offer_id":50952138883357,"sku":"HOR R7335","price":112.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0059\/3212\/2200\/files\/HOR_20R7335.jpg?v=1771297914"}],"url":"https:\/\/ironhorsehobbies.co.nz\/collections\/digital-decoders\/segment_model-railway.oembed","provider":"Ironhorse Hobbies","version":"1.0","type":"link"}